The effects of machining parameters on conventional machining: An overview

N. K. Angwenyi; N. M. Senga; N. K. Ronoh; F. M. Mwema; E. T. Akinlabi; B. Tanya

doi:10.1016/j.matpr.2020.11.751

The effects of machining parameters on conventional machining: An overview

N. K. Angwenyi, N. M. Senga, N. K. Ronoh, F. M. Mwema, E. T. Akinlabi, B. Tanya

Research output: Contribution to journal › Conference article › peer-review

2 Citations (Scopus)

Abstract

This paper presents an overview of the state-of-the-art literature of the influence of machining parameters on conventional machining of materials. It is observed that depth of cut, cutting speed, cutting fluids, and feed rate are the common parameters considered during machining of hard-to-machine materials. It is also observed that optimization techniques evaluating the combined influence of these parameters have been considerably reported for different machining technologies.

Original language	English
Pages (from-to)	1540-1542
Number of pages	3
Journal	Materials Today: Proceedings
Volume	44
DOIs	https://doi.org/10.1016/j.matpr.2020.11.751
Publication status	Published - 2021
Externally published	Yes
Event	11th International Conference on Materials Processing and Characterization - Indore, India Duration: 15 Dec 2020 → 17 Dec 2020

Keywords

Cutting speed
Depth of cut
Feed rate
Machining
Optimization
Parameters
Surface roughness

ASJC Scopus subject areas

General Materials Science

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.matpr.2020.11.751

Cite this

@article{ee3d1b9dc3f5465ab0eb07a83d51f62e,

title = "The effects of machining parameters on conventional machining: An overview",

abstract = "This paper presents an overview of the state-of-the-art literature of the influence of machining parameters on conventional machining of materials. It is observed that depth of cut, cutting speed, cutting fluids, and feed rate are the common parameters considered during machining of hard-to-machine materials. It is also observed that optimization techniques evaluating the combined influence of these parameters have been considerably reported for different machining technologies.",

keywords = "Cutting speed, Depth of cut, Feed rate, Machining, Optimization, Parameters, Surface roughness",

author = "Angwenyi, {N. K.} and Senga, {N. M.} and Ronoh, {N. K.} and Mwema, {F. M.} and Akinlabi, {E. T.} and B. Tanya",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier Ltd. All rights reserved.; 11th International Conference on Materials Processing and Characterization ; Conference date: 15-12-2020 Through 17-12-2020",

year = "2021",

doi = "10.1016/j.matpr.2020.11.751",

language = "English",

volume = "44",

pages = "1540--1542",

journal = "Materials Today: Proceedings",

issn = "2214-7853",

publisher = "Elsevier Ltd.",

}

TY - JOUR

T1 - The effects of machining parameters on conventional machining

T2 - 11th International Conference on Materials Processing and Characterization

AU - Angwenyi, N. K.

AU - Senga, N. M.

AU - Ronoh, N. K.

AU - Mwema, F. M.

AU - Akinlabi, E. T.

AU - Tanya, B.

PY - 2021

Y1 - 2021

N2 - This paper presents an overview of the state-of-the-art literature of the influence of machining parameters on conventional machining of materials. It is observed that depth of cut, cutting speed, cutting fluids, and feed rate are the common parameters considered during machining of hard-to-machine materials. It is also observed that optimization techniques evaluating the combined influence of these parameters have been considerably reported for different machining technologies.

AB - This paper presents an overview of the state-of-the-art literature of the influence of machining parameters on conventional machining of materials. It is observed that depth of cut, cutting speed, cutting fluids, and feed rate are the common parameters considered during machining of hard-to-machine materials. It is also observed that optimization techniques evaluating the combined influence of these parameters have been considerably reported for different machining technologies.

KW - Cutting speed

KW - Depth of cut

KW - Feed rate

KW - Machining

KW - Optimization

KW - Parameters

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=85105601952&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2020.11.751

DO - 10.1016/j.matpr.2020.11.751

M3 - Conference article

AN - SCOPUS:85105601952

SN - 2214-7853

VL - 44

SP - 1540

EP - 1542

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

Y2 - 15 December 2020 through 17 December 2020

ER -

The effects of machining parameters on conventional machining: An overview

Abstract

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this