Optimal Design and Comparative Analysis of a PV/Mini-Hydropower and a PV/Battery Used for Electricity and Water Supply

This work proposed an optimal design of PV-system-based water-pumped energy storage for both electricity and water supply. A case study was considered in a rural community in Cameroon. The parameters of the assessment of the system were reliability, represented in the present work by the system supply deficiency (SSD), and economic accessibility, represented by the levelized cost of energy (LCOE). The obtained results showed that for 0% SSD, the optimal configuration of the system was composed of 438 PV modules of 235 W, an immersed solar motor pump of 35 kW, a hydroelectric turbine of 51.7 kW, an upper reservoir of 2307.1 m³, an inverter of 25.27 kW, and a total dynamic head of 88 m. The corresponding LCOE to this configuration is 0.224 USD/kWh. The economic accessibility of the designed system was evaluated by comparison with a PV-system-based battery energy storage. The optimal design configuration of the studied PV-system-based battery energy storage was a PV generator (120 PV modules of 235 W), solar motor pump (15 kW), upper reservoir (590.4 m³), battery capacity (351.78 kWh), inverter (25.27 kW), and total dynamic head (81 m). The corresponding LCOE to this configuration was 0.1857 USD/kWh. Although the PV-system-based battery storage appeared to be economically more cost-effective than the PV-system-based water-pumped energy storage, the sensitivity analysis revealed that there was the possibility for the PV-system-based water-pumped energy storage to be economically more profitable than the PV-system-based battery energy storage. This economic outperformance occurred when the project lifetime was a multiple of 7.5 years or when the costs of the storage components were reduced from 20% to 60%.