Microstructural and corrosion resistance study of sintered al-tin in sodium chloride solution.

Samuel Olukayode Akinwamide; Neo Tshabalala; Oluwasegun Eso Falodun; Samuel Ranti Oke; Ojo Jeremiah Akinribide; Bolanle Tolulope Abe; Peter Apata Olubambi

doi:10.1016/j.matpr.2019.07.156

Microstructural and corrosion resistance study of sintered al-tin in sodium chloride solution.

Samuel Olukayode Akinwamide, Neo Tshabalala, Oluwasegun Eso Falodun, Samuel Ranti Oke, Ojo Jeremiah Akinribide, Bolanle Tolulope Abe, Peter Apata Olubambi

Metallurgy

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

Abstract

Aluminium matrix composites were produced by adding 2, 4, 6 and 8 wt. % of titanium nitride (TiN) nanoparticles respectively to aluminium matrix through powder metallurgy technique. The mixed powder was compacted at a pressure of 50 MPa to produce the specimens. The specimens were sintered in nitrogen atmosphere at a sintering temperature of 4000C with sintering time of 2 hours for each. Microstructural and mechanical properties of sintered composites was investigated. Potentiodynamic polarization test was conducted to determine the corrosion behaviour of sintered samples in sodium chloride.

Original language	English
Pages (from-to)	2881-2886
Number of pages	6
Journal	Materials Today: Proceedings
Volume	18
DOIs	https://doi.org/10.1016/j.matpr.2019.07.156
Publication status	Published - 2019
Event	9th International Conference of Materials Processing and Characterization, ICMPC 2019 - Hyderabad, Andhra Pradesh, India Duration: 8 Mar 2019 → 10 Mar 2019

Keywords

Aluminium
Open circuit potential
Potentiodynamic polarization
Sintering
Titanium nitride

ASJC Scopus subject areas

General Materials Science

Access to Document

10.1016/j.matpr.2019.07.156

Cite this

@article{46ade44cdf994b2b9c8c9d7a9d949a5c,

title = "Microstructural and corrosion resistance study of sintered al-tin in sodium chloride solution.",

abstract = "Aluminium matrix composites were produced by adding 2, 4, 6 and 8 wt. % of titanium nitride (TiN) nanoparticles respectively to aluminium matrix through powder metallurgy technique. The mixed powder was compacted at a pressure of 50 MPa to produce the specimens. The specimens were sintered in nitrogen atmosphere at a sintering temperature of 4000C with sintering time of 2 hours for each. Microstructural and mechanical properties of sintered composites was investigated. Potentiodynamic polarization test was conducted to determine the corrosion behaviour of sintered samples in sodium chloride.",

keywords = "Aluminium, Open circuit potential, Potentiodynamic polarization, Sintering, Titanium nitride",

author = "Akinwamide, {Samuel Olukayode} and Neo Tshabalala and Falodun, {Oluwasegun Eso} and Oke, {Samuel Ranti} and Akinribide, {Ojo Jeremiah} and Abe, {Bolanle Tolulope} and Olubambi, {Peter Apata}",

note = "Publisher Copyright: {\textcopyright} 2019 Elsevier Ltd.; 9th International Conference of Materials Processing and Characterization, ICMPC 2019 ; Conference date: 08-03-2019 Through 10-03-2019",

year = "2019",

doi = "10.1016/j.matpr.2019.07.156",

language = "English",

volume = "18",

pages = "2881--2886",

journal = "Materials Today: Proceedings",

issn = "2214-7853",

publisher = "Elsevier Ltd.",

}

TY - JOUR

T1 - Microstructural and corrosion resistance study of sintered al-tin in sodium chloride solution.

AU - Akinwamide, Samuel Olukayode

AU - Tshabalala, Neo

AU - Falodun, Oluwasegun Eso

AU - Oke, Samuel Ranti

AU - Akinribide, Ojo Jeremiah

AU - Abe, Bolanle Tolulope

AU - Olubambi, Peter Apata

PY - 2019

Y1 - 2019

N2 - Aluminium matrix composites were produced by adding 2, 4, 6 and 8 wt. % of titanium nitride (TiN) nanoparticles respectively to aluminium matrix through powder metallurgy technique. The mixed powder was compacted at a pressure of 50 MPa to produce the specimens. The specimens were sintered in nitrogen atmosphere at a sintering temperature of 4000C with sintering time of 2 hours for each. Microstructural and mechanical properties of sintered composites was investigated. Potentiodynamic polarization test was conducted to determine the corrosion behaviour of sintered samples in sodium chloride.

AB - Aluminium matrix composites were produced by adding 2, 4, 6 and 8 wt. % of titanium nitride (TiN) nanoparticles respectively to aluminium matrix through powder metallurgy technique. The mixed powder was compacted at a pressure of 50 MPa to produce the specimens. The specimens were sintered in nitrogen atmosphere at a sintering temperature of 4000C with sintering time of 2 hours for each. Microstructural and mechanical properties of sintered composites was investigated. Potentiodynamic polarization test was conducted to determine the corrosion behaviour of sintered samples in sodium chloride.

KW - Aluminium

KW - Open circuit potential

KW - Potentiodynamic polarization

KW - Sintering

KW - Titanium nitride

UR - http://www.scopus.com/inward/record.url?scp=85077527714&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2019.07.156

DO - 10.1016/j.matpr.2019.07.156

M3 - Conference article

AN - SCOPUS:85077527714

SN - 2214-7853

VL - 18

SP - 2881

EP - 2886

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

T2 - 9th International Conference of Materials Processing and Characterization, ICMPC 2019

Y2 - 8 March 2019 through 10 March 2019

ER -

Microstructural and corrosion resistance study of sintered al-tin in sodium chloride solution.

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this