Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach

Enesi Y. Salawu; Emuowhochere Oghenevwegba; Oluseyi O. Ajayi; A. O. Inegbenebor; E. T. Akinlabi; S. T. Akinlabi

doi:10.1007/978-3-030-05861-6_65

Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach

Enesi Y. Salawu
, Emuowhochere Oghenevwegba
, Oluseyi O. Ajayi
, A. O. Inegbenebor
, E. T. Akinlabi
, S. T. Akinlabi

Mechanical Engineering Science

Covenant University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Abstract

Casting process is widely used in preparing spur gear blanks or in complete production of gears because of its less defect at the end of the process. The importance of the gating system in casting process lies in its ability to channel molten metal into the mould cavity within the allowable period at a controlled parameter. The study therefore investigated the effect of increasing the gating system on the solidification of molten metal during gear cast to determine the time of solidification and casting productivity. Both the top and bottom gating system were modelled in solidwork, while the simulation was done using Pro-Cast. The result revealed that for the case of two runner gating system, both the top and bottom gating system took 9.195 and 9.320 s respectively, to fill the mould cavity. However, the three-runner gating system took a shorter filling time with top gating system having 8.824 s filling time and the bottom gating system took about 9.655 s to fill the mould cavity. The outcome showed that the top gating system tends to discharge molten metal faster than the bottom gating system as seen from the filling time of both the two and the three-gating system.

Original language	English
Title of host publication	TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings
Publisher	Springer International Publishing
Pages	667-677
Number of pages	11
ISBN (Print)	9783030058609
DOIs	https://doi.org/10.1007/978-3-030-05861-6_65
Publication status	Published - 2019
Event	148th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2019 - San Antonio, United States Duration: 10 Mar 2019 → 14 Mar 2019

Publication series

Name	Minerals, Metals and Materials Series
ISSN (Print)	2367-1181
ISSN (Electronic)	2367-1696

Conference

Conference	148th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2019
Country/Territory	United States
City	San Antonio
Period	10/03/19 → 14/03/19

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Energy savings
Production technology
Simulation
Spur gear

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Energy Engineering and Power Technology
Mechanics of Materials
Metals and Alloys
Materials Chemistry

Access to Document

10.1007/978-3-030-05861-6_65

Cite this

Salawu, E. Y., Oghenevwegba, E., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, E. T., & Akinlabi, S. T. (2019). Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings (pp. 667-677). (Minerals, Metals and Materials Series). Springer International Publishing. https://doi.org/10.1007/978-3-030-05861-6_65

@inproceedings{85027441d2654c9d9e46d6597ac48d17,

title = "Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach",

abstract = "Casting process is widely used in preparing spur gear blanks or in complete production of gears because of its less defect at the end of the process. The importance of the gating system in casting process lies in its ability to channel molten metal into the mould cavity within the allowable period at a controlled parameter. The study therefore investigated the effect of increasing the gating system on the solidification of molten metal during gear cast to determine the time of solidification and casting productivity. Both the top and bottom gating system were modelled in solidwork, while the simulation was done using Pro-Cast. The result revealed that for the case of two runner gating system, both the top and bottom gating system took 9.195 and 9.320 s respectively, to fill the mould cavity. However, the three-runner gating system took a shorter filling time with top gating system having 8.824 s filling time and the bottom gating system took about 9.655 s to fill the mould cavity. The outcome showed that the top gating system tends to discharge molten metal faster than the bottom gating system as seen from the filling time of both the two and the three-gating system.",

keywords = "Energy savings, Production technology, Simulation, Spur gear",

author = "Salawu, \{Enesi Y.\} and Emuowhochere Oghenevwegba and Ajayi, \{Oluseyi O.\} and Inegbenebor, \{A. O.\} and Akinlabi, \{E. T.\} and Akinlabi, \{S. T.\}",

note = "Publisher Copyright: {\textcopyright} 2019, The Minerals, Metals \& Materials Society.; 148th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2019 ; Conference date: 10-03-2019 Through 14-03-2019",

year = "2019",

doi = "10.1007/978-3-030-05861-6\_65",

language = "English",

isbn = "9783030058609",

series = "Minerals, Metals and Materials Series",

publisher = "Springer International Publishing",

pages = "667--677",

booktitle = "TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings",

}

Salawu, EY, Oghenevwegba, E, Ajayi, OO, Inegbenebor, AO, Akinlabi, ET & Akinlabi, ST 2019, Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. in TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings. Minerals, Metals and Materials Series, Springer International Publishing, pp. 667-677, 148th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2019, San Antonio, United States, 10/03/19. https://doi.org/10.1007/978-3-030-05861-6_65

Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. / Salawu, Enesi Y.; Oghenevwegba, Emuowhochere; Ajayi, Oluseyi O. et al.
TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings. Springer International Publishing, 2019. p. 667-677 (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting

T2 - 148th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2019

AU - Salawu, Enesi Y.

AU - Oghenevwegba, Emuowhochere

AU - Ajayi, Oluseyi O.

AU - Inegbenebor, A. O.

AU - Akinlabi, E. T.

AU - Akinlabi, S. T.

PY - 2019

Y1 - 2019

N2 - Casting process is widely used in preparing spur gear blanks or in complete production of gears because of its less defect at the end of the process. The importance of the gating system in casting process lies in its ability to channel molten metal into the mould cavity within the allowable period at a controlled parameter. The study therefore investigated the effect of increasing the gating system on the solidification of molten metal during gear cast to determine the time of solidification and casting productivity. Both the top and bottom gating system were modelled in solidwork, while the simulation was done using Pro-Cast. The result revealed that for the case of two runner gating system, both the top and bottom gating system took 9.195 and 9.320 s respectively, to fill the mould cavity. However, the three-runner gating system took a shorter filling time with top gating system having 8.824 s filling time and the bottom gating system took about 9.655 s to fill the mould cavity. The outcome showed that the top gating system tends to discharge molten metal faster than the bottom gating system as seen from the filling time of both the two and the three-gating system.

AB - Casting process is widely used in preparing spur gear blanks or in complete production of gears because of its less defect at the end of the process. The importance of the gating system in casting process lies in its ability to channel molten metal into the mould cavity within the allowable period at a controlled parameter. The study therefore investigated the effect of increasing the gating system on the solidification of molten metal during gear cast to determine the time of solidification and casting productivity. Both the top and bottom gating system were modelled in solidwork, while the simulation was done using Pro-Cast. The result revealed that for the case of two runner gating system, both the top and bottom gating system took 9.195 and 9.320 s respectively, to fill the mould cavity. However, the three-runner gating system took a shorter filling time with top gating system having 8.824 s filling time and the bottom gating system took about 9.655 s to fill the mould cavity. The outcome showed that the top gating system tends to discharge molten metal faster than the bottom gating system as seen from the filling time of both the two and the three-gating system.

KW - Energy savings

KW - Production technology

KW - Simulation

KW - Spur gear

UR - https://www.scopus.com/pages/publications/85064884455

U2 - 10.1007/978-3-030-05861-6_65

DO - 10.1007/978-3-030-05861-6_65

M3 - Conference contribution

AN - SCOPUS:85064884455

SN - 9783030058609

T3 - Minerals, Metals and Materials Series

SP - 667

EP - 677

BT - TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings

PB - Springer International Publishing

Y2 - 10 March 2019 through 14 March 2019

ER -

Salawu EY, Oghenevwegba E, Ajayi OO, Inegbenebor AO, Akinlabi ET , Akinlabi ST. Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings. Springer International Publishing. 2019. p. 667-677. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-030-05861-6_65

Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this