TY - GEN
T1 - Development and Performance Evaluation of Gmelina-Arborea based Cutting Fluid for the Turning of AISI 1405 Steel
AU - Ikumapayi, Omolayo M.
AU - Laseinde, Opeyeolu T.
AU - Rominiyi, Oluwasina L.
AU - Adetunla, Adedotun O.
AU - Azeez, Temitayo M.
AU - Ogedengbe, Temitayo S.
N1 - Publisher Copyright:
© 2024 IEEE.
PY - 2024
Y1 - 2024
N2 - Gmelina Arborea seed was developed and was employed as a cutting fluid in the turning of AISI 1045 steel at different spindle speed, feed rates, and cut depths, and the results were compared to mineral oil-based cutting fluid and dry machining conditions. The cutting temperatures using developed oil were the lowest among all ranges from 34.07°C to 36.33°C while those obtained when the developed dry machining were the highest temperature ranges from 34.13°C to 36.67°C. It was also collated that; dry machining had the highest surface roughness ranges from 0.249mm to 0.275mm, when the mineral oil used the surface roughness from 0.232 to 0.271 and when the produced Gmelina arborea seed oil was used, the surface roughness generated were the least, thus 0.226mm to 0.275mm. It was noted that the Gmelina Arborea seed oil produced the lowest cutting temperature and lowest surface roughness range for all the machined samples.
AB - Gmelina Arborea seed was developed and was employed as a cutting fluid in the turning of AISI 1045 steel at different spindle speed, feed rates, and cut depths, and the results were compared to mineral oil-based cutting fluid and dry machining conditions. The cutting temperatures using developed oil were the lowest among all ranges from 34.07°C to 36.33°C while those obtained when the developed dry machining were the highest temperature ranges from 34.13°C to 36.67°C. It was also collated that; dry machining had the highest surface roughness ranges from 0.249mm to 0.275mm, when the mineral oil used the surface roughness from 0.232 to 0.271 and when the produced Gmelina arborea seed oil was used, the surface roughness generated were the least, thus 0.226mm to 0.275mm. It was noted that the Gmelina Arborea seed oil produced the lowest cutting temperature and lowest surface roughness range for all the machined samples.
KW - AISI 1045 steel
KW - bio-cutting fluid
KW - cutting temperature
KW - Gmelina Arborea seed
KW - mineral oil
KW - Surface roughness
UR - http://www.scopus.com/inward/record.url?scp=85202951080&partnerID=8YFLogxK
U2 - 10.1109/SEB4SDG60871.2024.10630151
DO - 10.1109/SEB4SDG60871.2024.10630151
M3 - Conference contribution
AN - SCOPUS:85202951080
T3 - International Conference on Science, Engineering and Business for Driving Sustainable Development Goals, SEB4SDG 2024
BT - International Conference on Science, Engineering and Business for Driving Sustainable Development Goals, SEB4SDG 2024
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals, SEB4SDG 2024
Y2 - 2 April 2024 through 4 April 2024
ER -