Design and Implementation of Third Order Oscillator using CFOA and OTA

Manoj Joshi; Kirti; P. Thakur

doi:10.1109/ICECET52533.2021.9698785

Design and Implementation of Third Order Oscillator using CFOA and OTA

Manoj Joshi, Kirti, P. Thakur

Electrical and Electronic Engineering Science

Dr. A.P.J. Abdul Kalam Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

In this research work, a high-frequency third-order quadrature oscillator employing an advanced analog integrated circuit as an active block is designed that offers both Voltage and Current mode (VM and CM) sinusoidal signals. Also, the Condition of Oscillation (COO) and Frequency of Oscillation (FOO) can be electronically tuned via bias current IB in Operational Trans-conductance Amplifier (OTA) in the proposed design. The workability test of the novel oscillator is well verified using ICs AD844 and IC3080. In addition to this, the proposed design offers a high frequency (up to MHz range) of operation by consuming less power.

Original language	English
Title of host publication	International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665442312
DOIs	https://doi.org/10.1109/ICECET52533.2021.9698785
Publication status	Published - 2021
Event	2021 International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021 - Cape Town, South Africa Duration: 9 Dec 2021 → 10 Dec 2021

Publication series

Name	International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021

Conference

Conference	2021 International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021
Country/Territory	South Africa
City	Cape Town
Period	9/12/21 → 10/12/21

Keywords

high-frequency
operational trans-conductance amplifier
quadrature oscillator
third-order
voltage and current mode

ASJC Scopus subject areas

Electrical and Electronic Engineering
General Computer Science
Energy Engineering and Power Technology

Access to Document

10.1109/ICECET52533.2021.9698785

Cite this

Joshi, M., Kirti, & Thakur, P. (2021). Design and Implementation of Third Order Oscillator using CFOA and OTA. In International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021 (International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICECET52533.2021.9698785

@inproceedings{6490c766e6b3461eab440c7c8b9cc2b1,

title = "Design and Implementation of Third Order Oscillator using CFOA and OTA",

abstract = "In this research work, a high-frequency third-order quadrature oscillator employing an advanced analog integrated circuit as an active block is designed that offers both Voltage and Current mode (VM and CM) sinusoidal signals. Also, the Condition of Oscillation (COO) and Frequency of Oscillation (FOO) can be electronically tuned via bias current IB in Operational Trans-conductance Amplifier (OTA) in the proposed design. The workability test of the novel oscillator is well verified using ICs AD844 and IC3080. In addition to this, the proposed design offers a high frequency (up to MHz range) of operation by consuming less power.",

keywords = "high-frequency, operational trans-conductance amplifier, quadrature oscillator, third-order, voltage and current mode",

author = "Manoj Joshi and Kirti and P. Thakur",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 2021 International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021 ; Conference date: 09-12-2021 Through 10-12-2021",

year = "2021",

doi = "10.1109/ICECET52533.2021.9698785",

language = "English",

series = "International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021",

address = "United States",

}

Joshi, M, Kirti, & Thakur, P 2021, Design and Implementation of Third Order Oscillator using CFOA and OTA. in International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021. International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021, Institute of Electrical and Electronics Engineers Inc., 2021 International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021, Cape Town, South Africa, 9/12/21. https://doi.org/10.1109/ICECET52533.2021.9698785

Design and Implementation of Third Order Oscillator using CFOA and OTA. / Joshi, Manoj; Kirti, ; Thakur, P.
International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021. Institute of Electrical and Electronics Engineers Inc., 2021. (International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Implementation of Third Order Oscillator using CFOA and OTA

AU - Joshi, Manoj

AU - Kirti,

AU - Thakur, P.

PY - 2021

Y1 - 2021

N2 - In this research work, a high-frequency third-order quadrature oscillator employing an advanced analog integrated circuit as an active block is designed that offers both Voltage and Current mode (VM and CM) sinusoidal signals. Also, the Condition of Oscillation (COO) and Frequency of Oscillation (FOO) can be electronically tuned via bias current IB in Operational Trans-conductance Amplifier (OTA) in the proposed design. The workability test of the novel oscillator is well verified using ICs AD844 and IC3080. In addition to this, the proposed design offers a high frequency (up to MHz range) of operation by consuming less power.

AB - In this research work, a high-frequency third-order quadrature oscillator employing an advanced analog integrated circuit as an active block is designed that offers both Voltage and Current mode (VM and CM) sinusoidal signals. Also, the Condition of Oscillation (COO) and Frequency of Oscillation (FOO) can be electronically tuned via bias current IB in Operational Trans-conductance Amplifier (OTA) in the proposed design. The workability test of the novel oscillator is well verified using ICs AD844 and IC3080. In addition to this, the proposed design offers a high frequency (up to MHz range) of operation by consuming less power.

KW - high-frequency

KW - operational trans-conductance amplifier

KW - quadrature oscillator

KW - third-order

KW - voltage and current mode

UR - http://www.scopus.com/inward/record.url?scp=85127071007&partnerID=8YFLogxK

U2 - 10.1109/ICECET52533.2021.9698785

DO - 10.1109/ICECET52533.2021.9698785

M3 - Conference contribution

AN - SCOPUS:85127071007

T3 - International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021

BT - International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2021 International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021

Y2 - 9 December 2021 through 10 December 2021

ER -

Joshi M, Kirti , Thakur P. Design and Implementation of Third Order Oscillator using CFOA and OTA. In International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021. Institute of Electrical and Electronics Engineers Inc. 2021. (International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021). doi: 10.1109/ICECET52533.2021.9698785

Design and Implementation of Third Order Oscillator using CFOA and OTA

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this