Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)

Hacene Hachache; Zineb Hamlati; Safia Alleg; Amar Mansesi; Ngeleshi Michel Kibambe; Smith Salifu; Busang Alphews; Peter Apata Olubambi

doi:10.1007/s11665-025-13112-2

Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)

Hacene Hachache
, Zineb Hamlati
, Safia Alleg
, Amar Mansesi
, Ngeleshi Michel Kibambe
, Smith Salifu
, Busang Alphews
, Peter Apata Olubambi

Metallurgy

Research output: Contribution to journal › Comment/debate

Abstract

The graphic for Fig. 2(d) was missing from the article as originally published. Evolution of the XRD patterns of the Al-2CNT as a function of milling time (a), the enlargement of the Al (111) diffraction peak during milling with (b) and without the initial powder mixture (c), and a typical Rietveld refinement of the XRD pattern of the MA-60 powders (d) The original article has been corrected.

Original language	English
Journal	Journal of Materials Engineering and Performance
DOIs	https://doi.org/10.1007/s11665-025-13112-2
Publication status	Accepted/In press - 2026

ASJC Scopus subject areas

General Materials Science
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1007/s11665-025-13112-2

Fingerprint

Dive into the research topics of 'Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)'. Together they form a unique fingerprint.

Cite this

Hachache, H., Hamlati, Z., Alleg, S., Mansesi, A., Kibambe, N. M., Salifu, S., Alphews, B., & Olubambi, P. A. (Accepted/In press). Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2). Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-025-13112-2

Hachache, Hacene ; Hamlati, Zineb ; Alleg, Safia et al. / Correction : Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2). In: Journal of Materials Engineering and Performance. 2026.

@article{5c08acc795094e77bd14d42c5385cb8b,

title = "Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.\% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)",

abstract = "The graphic for Fig. 2(d) was missing from the article as originally published. Evolution of the XRD patterns of the Al-2CNT as a function of milling time (a), the enlargement of the Al (111) diffraction peak during milling with (b) and without the initial powder mixture (c), and a typical Rietveld refinement of the XRD pattern of the MA-60 powders (d) The original article has been corrected.",

author = "Hacene Hachache and Zineb Hamlati and Safia Alleg and Amar Mansesi and Kibambe, \{Ngeleshi Michel\} and Smith Salifu and Busang Alphews and Olubambi, \{Peter Apata\}",

note = "Publisher Copyright: {\textcopyright} ASM International 2026.",

year = "2026",

doi = "10.1007/s11665-025-13112-2",

language = "English",

journal = "Journal of Materials Engineering and Performance",

issn = "1059-9495",

publisher = "Springer New York",

}

Hachache, H, Hamlati, Z, Alleg, S, Mansesi, A, Kibambe, NM, Salifu, S, Alphews, B & Olubambi, PA 2026, 'Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)', Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-025-13112-2

Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2). / Hachache, Hacene; Hamlati, Zineb; Alleg, Safia et al.
In: Journal of Materials Engineering and Performance, 2026.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Correction

T2 - Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2)

AU - Hachache, Hacene

AU - Hamlati, Zineb

AU - Alleg, Safia

AU - Mansesi, Amar

AU - Kibambe, Ngeleshi Michel

AU - Salifu, Smith

AU - Alphews, Busang

AU - Olubambi, Peter Apata

PY - 2026

Y1 - 2026

N2 - The graphic for Fig. 2(d) was missing from the article as originally published. Evolution of the XRD patterns of the Al-2CNT as a function of milling time (a), the enlargement of the Al (111) diffraction peak during milling with (b) and without the initial powder mixture (c), and a typical Rietveld refinement of the XRD pattern of the MA-60 powders (d) The original article has been corrected.

AB - The graphic for Fig. 2(d) was missing from the article as originally published. Evolution of the XRD patterns of the Al-2CNT as a function of milling time (a), the enlargement of the Al (111) diffraction peak during milling with (b) and without the initial powder mixture (c), and a typical Rietveld refinement of the XRD pattern of the MA-60 powders (d) The original article has been corrected.

UR - https://www.scopus.com/pages/publications/105028204385

U2 - 10.1007/s11665-025-13112-2

DO - 10.1007/s11665-025-13112-2

M3 - Comment/debate

AN - SCOPUS:105028204385

SN - 1059-9495

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

ER -

Hachache H, Hamlati Z, Alleg S, Mansesi A, Kibambe NM, Salifu S et al. Correction: Microstructural, Thermal, Mechanical, and Tribological Properties of Al-2 wt.% CNT Nanocomposites Prepared by Mechanical Alloying, Conventional Sintering, and Spark Plasma Sintering (Journal of Materials Engineering and Performance, (2025), 10.1007/s11665-025-12960-2). Journal of Materials Engineering and Performance. 2026. doi: 10.1007/s11665-025-13112-2